LM2902-Q1 Datenblatt PDF – Quad OP AMP – TI

Teilenummer : LM2902-Q1

Function : QUADRUPLE OPERATIONAL AMPLIFIER

Hersteller : Texas Instruments

Pinout :

LM2902-Q1 datenblatt

Beschreibung :

This device consists of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is possible when the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffixed devices), and VCCis at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage. Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM2902 can be operated directly from the standard 5-V supply that is used in digital systems and easily provides the required interface electronics without requiring additional ±15-V supplies.

1. Qualified for Automotive Applications
2. ESD Protection <500 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0); 1500 V Using Charged Device Model
3. ESD Human Body Model 2 kV,  Machine Model 200 V and Charge Device Model = 2 kV For
K-Suffix Devices.
4. Low Supply-Current Drain Independent of Supply Voltage. . . 0.8 mA Typ
5. Low Input Bias and Offset Parameters:
− Input Offset Voltage…3 mV Typ
− Input Offset Current…2 nA Typ
− Input Bias Current…20 nA Typ
6. Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing  Near Ground
7. Differential Input Voltage Range Equal to  Maximum-Rated Supply Voltage:
− Non-V devices…26 V
− V-Suffix devices…32 V
8. Open-Loop Differential Voltage
Amplification. . . 100 V/mV Typ
9. Internal Frequency Compensation

 

LM2902-Q1 Datenblatt PDF Download

LM2902-Q1 pdf

Andere Datenblätter in der Datei : LM2902KAVQDRQ1, LM2902KAVQPWRG4Q1, LM2902KAVQPWRQ1

25L1605D Datenblatt – 16M-BIT CMOS Serial Flash – Macronix

Teilenummer : 25L1605D, MX25L1605D

Function : CMOS SERIAL FLASH

Hersteller : Macronix International

Pinout :

25L1605D datenblatt

Beschreibung :

MX25L1605D : 16M-BIT [x 1 / x 2] CMOS SERIAL FLASH

MX25L3205D : 32M-BIT [x 1 / x 2] CMOS SERIAL FLASH

MX25L6405D : 64M-BIT [x 1 / x 2] CMOS SERIAL FLASH

The MX25L1605D are 16,777,216 bit serial Flash memory, which is configured as 2,097,152 x 8 internally. When it is in two I/O read mode, the structure becomes 8,388,608 bits x 2. The MX25L3205D are 33,554,432 bit serial Flash memory, which is configured as 4,194,304 x 8 internally. When it is in two I/O read mode, the structure be comes 16,772,216 bits x 2. The MX25L6405D are 67,108,864 bit serial Flash memory, which is configured as 8,388,608 x 8 internally. When it is in two I/O read mode, the structure becomes 33,554,432 bits x 2. (please refer to the „Two I/O Read mode“ section). The MX25L1605D/3205D/6405D feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.

 

25L1605D Datenblatt PDF Download

25L1605D pdf

Andere Datenblätter in der Datei : 25L3205D, 25L6405D, MX25L1605D, MX25L3205D